[vc_row][vc_column][vc_single_image image=”76162″ img_size=”full” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_empty_space][vc_single_image image=”76166″ img_size=”large” alignment=”center”][/vc_column][vc_column width=”1/2″][vc_column_text]
Antares 700 X
[/vc_column_text][vc_column_text]The Antares 700 X is a CNC machine equipped with an X-ray vision system for the optimized execution of the tooling holes and any other mechanical reference on multilayer panels and inner layers.
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_empty_space][vc_single_image image=”76168″ img_size=”full” alignment=”center”][/vc_column][vc_column width=”1/2″][vc_column_text]
Galaxy 700 XB
[/vc_column_text][vc_column_text]
The Galaxy 700 XB is a processing line that, in addition to performing the optimized drilling of the reference holes after processing the panel with X-rays, eliminates the “flash” from the panel edges and rounds the corners, allowing good and safe handling for subsequent processes.
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_empty_space][vc_single_image image=”76169″ img_size=”full” alignment=”center”][/vc_column][vc_column width=”1/2″][vc_column_text]
X-Check 310 MF
[/vc_column_text][vc_column_text]
The X-Check 310 MF is an inspection bench that enables the quality-control of the CNC drilling process of multi-layer panels to be performed by measuring the centering error between hole and pad.
[/vc_column_text][/vc_column][/vc_row]